Smart, plug-and-play gauges built for modern CAN-Bus vehicles.
- Reads directly from your vehicle’s CAN-Bus for clean, accurate data
- Plug-and-play installation with minimal wiring
- Universal compatibility with OBDII-equipped vehicles
- Precision stepper motors for smooth, accurate pointer control
- Built tough for long-term performance without compromise
SKU: FHT2-V1-HTC
2-1/16" Haltech CAN-Bus Voltage Gauge | 6-18V with Warning
Reads voltage data directly from the Haltech ECU through the CAN network at 1M baud. Eliminates external voltage sensing when supported by the ECU. Precision stepper motor ensures smooth, accurate readings.
$158.00
SKU: FHT2-WT1-HTC
2-1/16" Haltech CAN-Bus Water Temp Gauge | 120-260F with Warning
Monitors coolant temperature directly from the Haltech ECU through the CAN network at 1M baud. Eliminates the need for an external temperature sender when supported for a cleaner install. Precision stepper motor delivers smooth, accurate water temperature readings, while the integrated warning light adds quick visual alerts.
$158.00
SKU: FHT2-WT2-HTC
2-1/16" Haltech CAN-Bus Water Temp Gauge | 50-125C with Warning
Monitors coolant temperature directly from the Haltech ECU through the CAN network at 1M baud. Eliminates the need for an external temperature sender when supported for a cleaner install. Precision stepper motor delivers smooth, accurate water temperature readings, while the integrated warning light adds quick visual alerts.
$158.00
SKU: R2-FL1-HTC
2-1/16" Haltech Fuel Level Gauge | Programmable with Warning
Supports fuel level sensors from 0–300 ohms with built-in preset ranges for quick setup. Manual calibration allows precise matching to non-standard senders. Precision stepper motor ensures smooth, accurate readings. Integrated low-fuel warning light provides real-time alerts.
$135.04
SKU: FHO3-S3-HLY
3-3/8" CAN-Bus Speedometer | 160 MPH | Holley EFI
Monitors vehicle speed directly from the Holley EFI ECU through the CAN network. Eliminates transmission sensors and drivetrain signal wiring for a cleaner install. Precision stepper motor delivers smooth, accurate speed readings.
$316.59
SKU: FHO3-TC4-HLY
3-3/8" CAN-Bus Tachometer | 10K RPM | Holley EFI
Delivers engine RPM data directly from the Holley EFI ECU through the CAN network. Eliminates coil signal wiring and external tach inputs for a cleaner setup. Precision stepper motor delivers smooth, accurate RPM tracking.
$187.28
SKU: FHO3-TC3-HLY
3-3/8" CAN-Bus Tachometer | 8K RPM | Holley EFI
Delivers engine RPM data directly from the Holley EFI ECU through the CAN network. Eliminates coil signal wiring and external tach inputs for a cleaner setup. Precision stepper motor delivers smooth, accurate RPM tracking.
$187.28
SKU: GF3-113
3-3/8" GM CAN-Bus Speedometer | 100 MPH
Built to pull speed data directly from the GM ECU through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$261.12
SKU: GF3-100
3-3/8" GM CAN-Bus Speedometer | 120 MPH
Pulls vehicle speed directly from the GM ECU through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$261.12
SKU: GF3-104
3-3/8" GM CAN-Bus Speedometer | 160 MPH
Gets vehicle speed directly from the GM ECU through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$261.12
SKU: GF3-105
3-3/8" GM CAN-Bus Speedometer | 200 km/h
Displays vehicle speed using data sent directly from the GM ECU through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$261.12
SKU: GF3-101
3-3/8" GM CAN-Bus Speedometer | 260 km/h
Designed to receive vehicle speed directly from the GM ECU through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$261.12
SKU: GF3-118
3-3/8" GM CAN-Bus Tachometer | 10K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$180.86
SKU: GF3-119
3-3/8" GM CAN-Bus Tachometer | 12K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$180.86
SKU: GF3-116
3-3/8" GM CAN-Bus Tachometer | 4K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$180.86
SKU: GF3-117
3-3/8" GM CAN-Bus Tachometer | 6K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$180.86
SKU: GF3-115
3-3/8" GM CAN-Bus Tachometer | 8K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$180.86
SKU: GFR3-103
3-3/8" GM CAN-Bus Tachometer with Shift Light | 10K RPM
Direct ECU RPM data through the OBDII CAN network gives this tachometer a cleaner installation on supported 2008+ GM applications. Eliminates coil and tach wiring when CAN RPM output is available. Smooth, accurate stepper motor readings are paired with integrated shift lights for real-time RPM alerts.
$196.89
SKU: GFR3-104
3-3/8" GM CAN-Bus Tachometer with Shift Light | 12K RPM
Direct ECU RPM data through the OBDII CAN network gives this tachometer a cleaner installation on supported 2008+ GM applications. Eliminates coil and tach wiring when CAN RPM output is available. Smooth, accurate stepper motor readings are paired with integrated shift lights for real-time RPM alerts.
$196.89
SKU: GFR3-100
3-3/8" GM CAN-Bus Tachometer with Shift Light | 8K RPM
Direct ECU RPM data through the OBDII CAN network gives this tachometer a cleaner installation on supported 2008+ GM applications. Eliminates coil and tach wiring when CAN RPM output is available. Smooth, accurate stepper motor readings are paired with integrated shift lights for real-time RPM alerts.
$196.89
SKU: FHT3-S1-HTC
3-3/8" Haltech CAN-Bus Speedometer | 120 MPH
Delivers vehicle speed data directly from the Haltech ECU through the CAN network at 1M baud for clean, accurate speed monitoring. Eliminates transmission sensors and added signal wiring when supported for a simpler install. Precision stepper motor keeps the pointer smooth, stable, and easy to read at a glance.
$287.81
SKU: FHT3-S1T-HTC
3-3/8" Haltech CAN-Bus Speedometer + TS/HB | 120 MPH
Delivers vehicle speed data directly from the Haltech ECU through the CAN network at 1M baud for clean, accurate speed monitoring. Eliminates transmission sensors and added signal wiring when supported for a simpler install. Precision stepper motor keeps the pointer smooth, stable, and easy to read at a glance.
$317.81
SKU: FHT3-TC3-HTC
3-3/8" Haltech CAN-Bus Tachometer | 8K RPM
Delivers engine RPM data directly from the Haltech ECU through the CAN network for clean, accurate tach monitoring. Eliminates coil signal wiring and external tach inputs for a simpler install. Precision stepper motor delivers smooth, stable, and accurate RPM readings.
$170.25
SKU: FOR4-SC1-EV
4" EV CAN-Bus Battery Level Gauge | 0-100% SOC with Warning | Orion / Thunderstruck / Zero EV
Delivers real-time battery state-of-charge monitoring directly from the CAN network at 500K baud, giving you clear visibility into available battery charge and driving range. Precision stepper motor ensures smooth, accurate readings, while an integrated warning light activates below 15% charge.
$198.95
SKU: GF4-112
4" GM CAN-Bus Speedometer | 100 MPH
Receives vehicle speed directly from the GM ECU through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$276.40
SKU: GF4-100
4" GM CAN-Bus Speedometer | 120 MPH
Taps directly into GM ECU speed data through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$276.40
SKU: GF4-104
4" GM CAN-Bus Speedometer | 160 MPH
Connects to vehicle speed data directly through the GM ECU over the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$276.40
SKU: GF4-105
4" GM CAN-Bus Speedometer | 200 km/h
Built around direct GM ECU speed input through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$276.40
SKU: GF4-101
4" GM CAN-Bus Speedometer | 260 km/h
Uses vehicle speed data directly from the GM ECU through the OBDII CAN network. Compatible with 2008+ GM ECUs with CAN data output. Eliminates transmission sensors and signal wiring when supported. Precision stepper motor delivers smooth, accurate speed readings.
$276.40
SKU: GF4-117
4" GM CAN-Bus Tachometer | 10K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$196.89
SKU: GF4-118
4" GM CAN-Bus Tachometer | 12K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$196.89
SKU: GF4-115
4" GM CAN-Bus Tachometer | 4K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$196.89
SKU: GF4-116
4" GM CAN-Bus Tachometer | 6K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$196.89
SKU: GF4-114
4" GM CAN-Bus Tachometer | 8K RPM
Delivers direct ECU-based RPM readings through the OBDII CAN network on supported 2008+ GM applications. Eliminates ignition coil and tach signal wiring when CAN RPM data is available. Precision stepper motor provides smooth, accurate RPM tracking.
$196.89
SKU: GFR4-103
4" GM CAN-Bus Tachometer with Shift Light | 10K RPM
Direct ECU RPM data through the OBDII CAN network gives this tachometer a cleaner installation on supported 2008+ GM applications. Eliminates coil and tach wiring when CAN RPM output is available. Smooth, accurate stepper motor readings are paired with integrated shift lights for real-time RPM alerts.
$211.48
SKU: GFR4-104
4" GM CAN-Bus Tachometer with Shift Light | 12K RPM
Direct ECU RPM data through the OBDII CAN network gives this tachometer a cleaner installation on supported 2008+ GM applications. Eliminates coil and tach wiring when CAN RPM output is available. Smooth, accurate stepper motor readings are paired with integrated shift lights for real-time RPM alerts.
$211.48