3-3/8" CAN-Bus Tachometer | 10K RPM | Holley EFI

SKU: FHO3-TC4-HLY
Be the first to review this product
$191.03 USD
Delivers engine RPM data directly from the Holley EFI ECU through the CAN network. Eliminates coil signal wiring and external tach inputs for a cleaner setup. Precision stepper motor delivers smooth, accurate RPM tracking.
+ -
Order leaves our facility in about 2 Weeks
⚠️ Required: Holley EFI Gauge Module (Part 554-130) is required to connect the gauge to the ECU (View on Holley.com).

Holley EFI CAN-Bus Tachometer is built to pull engine RPM directly from the Holley EFI ECU through the CAN network for a cleaner install with no coil signal wiring or external tach input required. Designed for Holley Terminator, Dominator, and Sniper EFI systems, it delivers real-time RPM data while keeping the setup clean and straightforward. A precision stepper motor keeps the needle smooth, stable, and accurate at a glance, while daisy-chain capability makes it easy to run multiple gauges on the same CAN network. With classic analog styling, IPX6-rated construction, and a factory-finished look, it’s built for long-term use. Made in the USA and backed for life.

Track-Tested. USA-Built. Backed for Life.

Key Features:

  • Direct ECU RPM Data — reads engine RPM directly from the Holley EFI ECU through the CAN network
  • No Signal Wiring Required — eliminates coil signal wiring and external tach inputs
  • Daisy-Chain Capable — supports clean multi-gauge installations on the same CAN network
  • Holley EFI Compatibility — works with Holley Terminator, Dominator, and Sniper EFI systems
  • Microprocessor-Driven — real-time accuracy
  • Stepper Motor Precision — smooth, accurate pointer movement
  • IPX6-Rated Build — built for long-term use
  • Made in the USA — backed by a lifetime warranty
Download Instructions
Built to last. Backed for life.
  • Lifetime warranty on internal circuit board electronics
  • 5-year coverage on sensors and wiring
  • Applies to gauges purchased since Jan. 1, 2006

Every Speedhut gauge includes a lifetime warranty* on the electronic circuit board inside the gauge case. It is the core of the gauge — the part responsible for the precision communication that delivers the accuracy and performance Speedhut is known for.

Sensors, wiring, and other external components are covered by an unlimited 5-year warranty.

This combined lifetime / 5-year warranty applies to the original purchaser.
*For your lifetime — as long as you own the gauge — we stand behind it.
Speedhut Inc warrants products to be free from defects in materials or workmanship. This warranty is limited to repair or replacement. Speedhut Inc is not responsible for incidental or consequential damages. Improper use, installation, or unauthorized modifications void this warranty.
Product reviews
Only registered users can write reviews
Customers who bought this item also bought
Customize
SKU: R2-FL1-HLY

2-1/16" Fuel Level Gauge | Programmable with Warning | Holley EFI

Delivers fuel level data directly from the Holley EFI ECU through the CAN network. Eliminates traditional sender wiring when supported by the ECU for a cleaner install. Precision stepper motor delivers smooth, accurate fuel level monitoring with an integrated warning light for added awareness.
$137.75 USD
Customize
SKU: R2-V3-HLY

2-1/16" CAN-Bus Volt Gauge | 0-18V with Warning | Holley EFI

Reads voltage data directly from the Holley EFI ECU through the CAN network. Eliminates additional sensing wiring for a cleaner install while supporting programmable high and low warnings with a settable warning light. Precision stepper motor delivers smooth, accurate readings.
$115.45 USD
Customize
SKU: R3-S3-REV

3-3/8" GPS Speedometer | 160 MPH

Real-time, calibration-free speed using GPS satellite data. No speed sensors, gear ratios, or tire size input required—just connect 12V power, mount the antenna, and drive. Built for manual, automatic, and custom setups, with a precision stepper motor for smooth, stable readings.
$358.65 USD
Customize
SKU: L2-FP4-LEG

2-1/16" Fuel Pressure Gauge | 0-100 PSI | Classic Design

Tracks fuel pressure in real time using a high-accuracy transducer for precise delivery data. Helps identify pressure drops or inconsistencies during acceleration and load. Precision stepper motor ensures smooth, stable readings.
$220.73 USD