Gauge Types
Select Subcategory
Performance gauges built for custom dashboards, swaps, and full vehicle builds.
- Shop by gauge type to find the exact reading your build needs
- Includes speedometers, tachometers, pressure, temperature, fuel, volt, amp, dual, and specialty gauges
- Available with GPS, CAN-Bus, sender-based, and programmable options
- Precision stepper motors for smooth, accurate pointer movement
- Built to perform for years without compromise
SKU: L25-ET2-LEG
2-5/8" Classic EGT Temperature Gauge | 200–2000°F
Reads exhaust gas temperature across a high-range 200–2000°F scale. Built for tuning, engine protection, and performance applications where hotter EGT data matters. Precision stepper motor movement keeps readings smooth, stable, and accurate.
$244.36 USD
SKU: L25-FL1-DATZ
2-5/8" Classic Fuel Level Gauge | Programmable | Datsun Z
Tracks fuel level using OEM sending units with user-configurable ohm ranges up to 300 ohms for broad compatibility. Calibrates to factory or custom resistance values for accurate, consistent readings. Precision stepper motor delivers smooth, stable performance.
$137.97 USD
SKU: L25-NP1-LEG
2-5/8" Classic Nitrous Pressure Gauge | 0-2000 PSI
Monitors nitrous bottle pressure in real time using a high-accuracy transducer for precise PSI data. Helps maintain optimal pressure for consistent performance during runs. Precision stepper motor ensures smooth, stable readings.
$244.36 USD
SKU: L25-OP5-LEG
2-5/8" Classic Oil Pressure Gauge | 0-14.0 Bar
Tracks oil pressure in real time using a high-accuracy transducer for precise lubrication system data. Helps catch pressure drops during startup, load, and performance driving. Precision stepper motor ensures smooth, stable readings.
$235.17 USD
SKU: L25-OP1-LEG
2-5/8" Classic Oil Pressure Gauge | 0-30 PSI
Tracks oil pressure in real time using a high-accuracy transducer for precise lubrication system data. Helps catch pressure drops during startup, load, and performance driving. Precision stepper motor ensures smooth, stable readings.
$235.17 USD
SKU: L25-OP4-LEG
2-5/8" Classic Oil Pressure Gauge | 0-7.0 Bar
Tracks oil pressure in real time using a high-accuracy transducer for precise lubrication system data. Helps catch pressure drops during startup, load, and performance driving. Precision stepper motor ensures smooth, stable readings.
$235.17 USD
SKU: L25-OP3-LEG
2-5/8" Classic Oil Pressure Gauge | 100 PSI
Reads engine oil pressure through a 3-wire military-grade pressure transducer across a 0–100 PSI range. Designed for clean pressure monitoring in classic street rods, custom builds, and performance applications. Precision stepper motor movement keeps readings smooth, stable, and accurate.
$235.17 USD
SKU: L25-OP3-DATZ
2-5/8" Classic Oil Pressure Gauge | 100 PSI | Datsun Z
Tracks oil pressure in real time using a high-accuracy transducer for precise lubrication system data. Helps catch pressure drops during startup, load, and performance driving. Precision stepper motor ensures smooth, stable readings.
$235.17 USD
SKU: L25-OT3-DATZ
2-5/8" Classic Oil Temp Gauge | 40-150C | Datsun Z
Keeps oil temperature front and center with a matched sender built for accurate real-time heat tracking under load. Makes it easier to catch rising temps before they become a problem, while a precision stepper motor ensures smooth, stable readings.
$176.07 USD
SKU: L25-OT2-LEG
2-5/8" Classic Oil Temperature Gauge | 100–300°F 90 Degree Sweep
Reads engine oil temperature through a matched 2-wire temp sender across a 100–300°F range. Uses a 90 degree sweep layout for clean, classic-style temperature monitoring in street rods, custom builds, and performance applications. Precision stepper motor movement keeps readings smooth, stable, and accurate.
$176.07 USD
SKU: L25-OT4-LEG
2-5/8" Classic Oil Temperature Gauge | 40-150°C | 90 Degree Sweep
Keeps oil temperature front and center with a matched sender built for accurate real-time heat tracking under load. Makes it easier to catch rising temps before they become a problem, while a precision stepper motor ensures smooth, stable readings.
$176.07 USD
SKU: L25-TC4-LEG
2-5/8" Classic Tachometer | 10K RPM for 1–12 Cylinder Engines
Programmable tachometer compatible from 1/2 to 6 pulses per revolution, accepting tach signals over one volt for broad engine compatibility. Works across a wide range of ignition systems and setups for clean installation. Precision stepper motor ensures smooth, stable, and accurate RPM readings.
$186.17 USD
SKU: L25-TC5-LEG
2-5/8" Classic Tachometer | 12K RPM for 1–12 Cylinder Engines
Tracks engine RPM up to 12K using a standard spark plug ignition signal. Works with 1–12 cylinder engines for clean RPM monitoring in classic street rods, custom builds, and performance applications. Precision stepper motor movement keeps readings smooth, stable, and accurate.
$186.17 USD
SKU: L25-TC1-LEG
2-5/8" Classic Tachometer | 4K RPM for 1–12 Cylinder Engines
Programmable tachometer compatible from 1/2 to 6 pulses per revolution, accepting tach signals over one volt for broad engine compatibility. Works across a wide range of ignition systems and setups for clean installation. Precision stepper motor ensures smooth, stable, and accurate RPM readings.
$186.17 USD
SKU: L25-TC2-LEG
2-5/8" Classic Tachometer | 6K RPM for 1–12 Cylinder Engines
Programmable tachometer compatible from 1/2 to 6 pulses per revolution, accepting tach signals over one volt for broad engine compatibility. Works across a wide range of ignition systems and setups for clean installation. Precision stepper motor ensures smooth, stable, and accurate RPM readings.
$186.17 USD
SKU: L25-TC3-LEG
2-5/8" Classic Tachometer | 8K RPM for 1–12 Cylinder Engines
Programmable tachometer compatible from 1/2 to 6 pulses per revolution, accepting tach signals over one volt for broad engine compatibility. Works across a wide range of ignition systems and setups for clean installation. Precision stepper motor ensures smooth, stable, and accurate RPM readings.
$186.17 USD
SKU: L25-UT2-LEG
2-5/8" Classic Ultra Low Temperature Gauge | 0–150°C Metric
Reads ultra-low temperature data across a 0–150°C metric range. Designed for clean, accurate temperature monitoring in classic street rods, custom builds, and specialty applications. Precision stepper motor movement keeps readings smooth, stable, and easy to trust.
$243.99 USD
SKU: L25-V2-LEG
2-5/8" Classic Volt Gauge | 6-18V | 90 Degree Sweep | Classic Design
Delivers clear, real-time system voltage visibility to track battery and charging performance in changing conditions. Helps identify electrical issues before they turn into bigger problems, while a precision stepper motor provides smooth, stable, and reliable readings.
$115.62 USD
SKU: L25-V1-LEG
2-5/8" Classic Volt Gauge | 6-18V | Classic Design
Delivers clear, real-time system voltage visibility to track battery and charging performance in changing conditions. Helps identify electrical issues before they turn into bigger problems, while a precision stepper motor provides smooth, stable, and reliable readings.
$115.62 USD
SKU: L25-V1-DATZ
2-5/8" Classic Volt Gauge | 6–18V | Datsun Z
Delivers clear, real-time system voltage visibility to track battery and charging performance in changing conditions. Helps identify electrical issues before they turn into bigger problems, while a precision stepper motor provides smooth, stable, and reliable readings.
$115.62 USD
SKU: L25-WT1-DATZ
2-5/8" Classic Water Temp Gauge | 120-260F | Datsun Z
Tracks engine coolant temperature with a dedicated sender for accurate, dependable monitoring of cooling system performance. Precision stepper motor delivers smooth, stable, and reliable readings.
$176.07 USD
SKU: L25-WT2-DATZ
2-5/8" Classic Water Temp Gauge | 50-125C | Datsun Z
Tracks engine coolant temperature with a dedicated sender for accurate, dependable monitoring of cooling system performance. Precision stepper motor delivers smooth, stable, and reliable readings.
$176.07 USD
SKU: L25-CK1-REV
2-5/8" Clock
Displays time in a clean, easy-to-read format designed to match your gauge set. Provides consistent, accurate timekeeping without drift. Precision stepper motor ensures smooth, stable movement.
$97.25 USD
SKU: L25-CK1-LEG
2-5/8" Clock | Classic Design
Displays time in a clean, easy-to-read format designed to match your gauge set. Provides consistent, accurate timekeeping without drift. Precision stepper motor ensures smooth, stable movement.
$97.25 USD
SKU: L25-CK1-DATZ
2-5/8" Clock | Datsun Z
Displays time in a clean, easy-to-read format designed to match your gauge set. Provides consistent, accurate timekeeping without drift. Precision stepper motor ensures smooth, stable movement.
$97.25 USD
SKU: L25-CK1-CJ
2-5/8" Clock | Jeep CJ Design
Displays time in a clean, easy-to-read format designed to match your Jeep CJ gauge set and look right at home in a trail-built dash. Provides consistent, accurate timekeeping without drift through daily driving, weekend runs, and long days off-road. Precision stepper motor ensures smooth, stable movement.
$110.39 USD
SKU: L25-CK1-PCH2
2-5/8" Clock | Porsche 356 Design
Displays time in a clean, easy-to-read format designed to match your gauge set. Provides consistent, accurate timekeeping without drift. Precision stepper motor ensures smooth, stable movement.
$97.08 USD
SKU: R25-CP1-REV
2-5/8" CNG Pressure Gauge | 0-4000 PSI | Warning Light
Monitors CNG system pressure in real time using a high-accuracy transducer for precise tank and line data, while an integrated warning light provides a clear visual alert when pressure moves out of range. Helps detect pressure drops early for safe, reliable operation. Precision stepper motor ensures smooth, stable readings.
$261.42 USD
SKU: L25-CT1-LEG
2-5/8" Cylinder Head Temperature Gauge | 100-500°F | Classic Design
Tracks cylinder head temperature at the source for accurate, dependable heat monitoring in demanding conditions. Helps identify rising temps under load and hard driving, while a precision stepper motor delivers smooth, stable readings.
$258.81 USD
SKU: R25-CT1-REV
2-5/8" Cylinder Head Temperature Gauge | 100-500°F | Warning Light
Tracks cylinder head temperature at the source for accurate, dependable heat monitoring in demanding conditions. Helps identify rising temps under load and hard driving, while a built-in warning light adds a clear visual alert. Precision stepper motor delivers smooth, stable readings.
$271.94 USD
SKU: L25-CT2-LEG
2-5/8" Cylinder Head Temperature Gauge | 50-250°C | Classic Design
Tracks cylinder head temperature at the source for accurate, dependable heat monitoring in demanding conditions. Helps identify rising temps under load and hard driving, while a precision stepper motor delivers smooth, stable readings.
$258.81 USD
SKU: R25-CT2-REV
2-5/8" Cylinder Head Temperature Gauge | 50-250°C | Warning Light
Tracks cylinder head temperature at the source for accurate, dependable heat monitoring in demanding conditions. Helps identify rising temps under load and hard driving, while a built-in warning light adds a clear visual alert. Precision stepper motor delivers smooth, stable readings.
$271.94 USD
SKU: L25-TC6-LEG
2-5/8" Diesel Tachometer | 4K RPM | Classic Design
Tracks engine RPM in real time with support for alternator (R or W terminal), crank sensor, and magnetic pickup signals for broad diesel compatibility. Designed for clean integration across a wide range of diesel builds, from work trucks to custom swaps. Precision stepper motor delivers smooth, stable, and accurate readings.
$192.95 USD
SKU: L25-TC7-LEG
2-5/8" Diesel Tachometer | 6K RPM | Classic Design
Tracks engine RPM in real time with support for alternator (R or W terminal), crank sensor, and magnetic pickup signals for broad diesel compatibility. Designed for clean integration across a wide range of diesel builds, from work trucks to custom swaps. Precision stepper motor delivers smooth, stable, and accurate readings.
$192.95 USD
SKU: L25-DT1-LEG
2-5/8" Differential Temperature Gauge | 100-300°F | Classic Design
Monitors differential temperature in real time to keep heat under load clear and easy to track. Helps you spot rising temps during towing, off-road driving, or performance use, while a precision stepper motor delivers smooth, stable readings.
$176.07 USD
SKU: L25-DT2-LEG
2-5/8" Differential Temperature Gauge | 100–300°F | Classic Design
Monitors differential temperature from 100–300°F for drivetrain protection and performance tracking. Includes a matched temperature sender for clean, accurate signal input. Precision stepper motor delivers smooth, stable readings for street, track, and performance builds.
$176.07 USD