2-1/16" EV CAN-Bus Motor Temp Gauge | 40-180F with Warning | Orion / Thunderstruck / Zero EV

SKU: FOR2-T4-EV
$161.16 USD
$128.93 USD
Monitors motor temperature data directly through the CAN network at 500K baud for seamless EV integration. Delivers real-time thermal monitoring in a clean, easy-to-read gauge with a warning light for added awareness. Precision stepper motor delivers smooth, accurate readings.
+ -
Order leaves our facility in about 2-3 Weeks

The EV CAN-Bus Motor Temp Gauge reads motor temperature data directly through the CAN network at 500K baud for a cleaner install with stable real-time thermal monitoring in one easy-to-read gauge. Built for seamless EV integration, it delivers accurate temperature data with a clean factory-style look to help monitor motor heat, protect performance, and give you better insight into overall EV system health without adding extra dash clutter. A precision stepper motor keeps the pointer smooth, accurate, and easy to read at a glance. Built for long-term reliability, it’s made in the USA and backed for life.

Warning Light Activation:
Warning light turns on above 160F.
Track-Tested. USA-Built. Backed for Life.

Key Features:

  • Direct CAN Motor Temp Data — reads motor temperature directly from the CAN network
  • 500K Baud CAN Communication — built for proper integration with supported EV systems
  • Real-Time Thermal Monitoring — accurate motor temperature data for system awareness and performance protection
  • Warning Light — turns on above 160F
  • Stepper Motor Precision — smooth, accurate pointer movement
  • Microprocessor-Driven — real-time accuracy
  • Made in the USA — backed by a lifetime warranty
Built to last. Backed for life.
  • Lifetime warranty on internal circuit board electronics
  • 5-year coverage on sensors and wiring
  • Applies to gauges purchased since Jan. 1, 2006

Every Speedhut gauge includes a lifetime warranty* on the electronic circuit board inside the gauge case. It is the core of the gauge — the part responsible for the precision communication that delivers the accuracy and performance Speedhut is known for.

Sensors, wiring, and other external components are covered by an unlimited 5-year warranty.

This combined lifetime / 5-year warranty applies to the original purchaser.
*For your lifetime — as long as you own the gauge — we stand behind it.
Orion SID’s (500K Baud Rate) (Select zero ev ccs in the Orion Canbus tab)
GaugesEndianStart BitBit LengthScalingOffsetTypeUnitsID HEX
Motor/Inverter TempIntel (Little Endian)321610SignedCelsius0X126
SpeedometerIntel (Little Endian)0160.10SignedMPH0X257
AmpIntel (Little Endian)16160.10SignedAmps0X356
Battery LevelIntel (Little Endian)01610Unsigned%0X355
12 Volt Batt.Intel (Little Endian)32160.10UnsignedVolts0X210
High Volt Batt.Intel (Little Endian)0160.10UnsignedVolts0X356
Battery TempIntel (Little Endian)32160.10SignedCelsius0X356

Our GM Freedom Speedometer, Tachometer, and Water Temperature gauges are generally universal for vehicles with OEM ECUs supporting J1939 OBD2 protocol (any post 2008 vehicle, select earlier vehicles). For other gauges you should reach out to us to verify if the gauges will work with your vehicle.

If you have an aftermarket ECU, you may need to get a custom programmed gauge. Custom fees may apply. The only aftermarket ECU CAN gauges we have on our website are Haltech, Holley, and for EV BMS we have AEM,  Orion / Zero EV / Thunderstruck, Resolve, and EV Controls

If you have an ECU not listed,  email [email protected] the following info:

  1. All the gauge types you want
  2. Specify what ECU you have
  3. Provide the DBC file/info (you will need to get that from the ECU manufacturer if you don't have it).


Our engineers will review the DBC and determine if we are able to make it work on the CAN bus.

Freedom CAN-Bus gauges run off your vehicles OBDII system using the CAN (J1979) protocol. These gauges can only be used on 2008 and newer vehicles (All vehicles 2008 and newer are required to be compatible with the CAN (J1979) protocol). Freedom CAN-Bus gauges CANNOT be connected to a sender or anything that sends a raw signal.

There are two options for connecting the Freedom Gauges to the OBDII system: Plug the gauges directly into the vehicle's 16-pin OBDII Data Link Connector - OR - If needed you can easily 'hard wire' into CAN high and low data lines to free up the OBDII port.

The gauges all use jumper cables to connect CAN signal.


Each Freedom CAN-bus gauge needs 12 volt DC power to operate. Connect the (Red, White, and Black*) power distribution cable to 12 volt DC power.

The OBDII connection does not provide power to the gauge.

*Red - +12 volts keyed ignition [main gauge power]
White - +12 Volt Dash Lighting [pointer lighting]
Black - ground

Product reviews
Only registered users can write reviews
Customers who bought this item also bought
SKU: FOR2-T5-EV

2-1/16" EV CAN-Bus Battery Temp Gauge | 0-120F with Warning | Orion / Thunderstruck / Zero EV

Tracks battery temperature directly through the CAN network at 500K baud for clean integration and dependable real-time thermal monitoring. Precision stepper motor delivers smooth, accurate readings with an integrated warning light that activates above 100°F (38°C).
$129.12 USD $161.40 USD
SKU: FOR2-SC1-EV

2-1/16" EV CAN-Bus Battery Level Gauge | 0-100% SOC with Warning | Orion / Thunderstruck / Zero EV

Tracks battery state-of-charge directly through the CAN network at 500K baud for clean integration and dependable real-time EV battery monitoring. Precision stepper motor delivers smooth, accurate readings with an integrated warning light that activates below 15% charge.
$129.12 USD $161.40 USD
SKU: FOR3-S1-EV

3-3/8" EV CAN-Bus Speedometer | 120 MPH | Orion / Thunderstruck / Zero EV

Delivers real-time vehicle speed data directly from the CAN network at 500K baud for seamless integration and a cleaner installation. Eliminates traditional speed sensors when supported by the ECU. Precision stepper motor ensures smooth, accurate speed readings.
$235.20 USD $294.00 USD
SKU: FOR2-AM1-EV

2-1/16" EV CAN-Bus Amp Gauge | -200 to 1200A | Orion / Thunderstruck / Zero EV

Delivers real-time electrical current monitoring directly from the CAN network at 500K baud, giving you clear visibility into amp draw and overall power usage. Precision stepper motor ensures smooth, accurate readings.
$119.12 USD $148.90 USD